Phoenix AZ EpoxyService
(602) 000-0000
Wide loft room with dark ceiling beams and a reflective silver metallic epoxy floor
Epoxy floor coating service · Phoenix, AZ

Concrete, resurfaced.

Garages, living spaces, patios, storefronts and warehouse floors. One coating team that handles the full job, from the first grind to the final clear coat, with a system chosen for how your property is actually used.

Compare Systems →

Free on-site quote

Homes, businesses and industrial space across Phoenix.

No obligation. We use your details only to respond to this request.

Full-service floor coatings

One crew for every kind of concrete floor.

Phoenix AZ Epoxy Service exists for a simple reason: most properties have more than one kind of concrete, and each one needs something different. A house might have a garage that takes hot tires, a laundry room that sees water, a covered patio that gets afternoon sun, and a casita someone wants to turn into an office. A business might have a showroom up front, a restroom corridor, and a stockroom where pallet jacks run all day.

We handle all of it. Our work covers resinous floor coatings from start to finish: surface preparation with diamond grinders, crack and joint repair, moisture testing, and the installation of epoxy, polyaspartic, polyurea and decorative systems. That means you deal with one team, one schedule and one point of responsibility, rather than a grinder sub, a coatings sub and a painter for the striping.

The approach is consistent across every job. We look at the slab before quoting, we explain the system layer by layer, and we choose materials based on exposure: sun, traffic, chemicals and how quickly the space needs to be back in service. You can see every system we install below, each with its own detailed guide.

See every service →
Installer spreading a fresh metallic epoxy layer with a squeegee
Close-up of a sandstone, white and black flake blend
Prep, repair, coat and topcoat, handled by one team.
Concrete floor grinder with dust shroud preparing a slab outdoors
Why choose our flooring services

What full-service actually means.

"Full-service" gets used loosely. For us it means the steps that usually get split between trades, or skipped, are all part of the same job and the same price.

Real surface prep

Diamond grinding with vacuum extraction on every coating job, not acid washing.

Repairs included

Cracks, spalls, pitted areas and joint edges are fixed before coating starts.

Moisture checked

Slabs are tested, and moisture-tolerant primers are used when readings call for them.

Written system specs

Your quote lists each layer, the product type, and when the floor returns to use.

Flooring systems & finishes

Four chemistries, compared honestly

Most of our floors use more than one of these materials. Knowing what each does well, and where it struggles, is how a system gets designed instead of guessed.

MaterialWhere it shinesWatch-outsTypical role in our systems
EpoxyDeep bond to ground concrete, high build, long working time for decorative and metallic work.Aromatic epoxies yellow and chalk under UV. Slower recoat and return to service.Primers, base coats, metallic layers and high-build industrial floors indoors.
PolyasparticUV stable, fast curing, hard and clear. Can often return a floor to use within a day.Short working time, especially on a hot slab. Needs an experienced crew.Clear topcoats over flake and color; full systems for sun-exposed areas.
PolyureaFast set and good flexibility, which helps on slabs that see big temperature swings.Many base-coat polyureas are aromatic and need a UV-stable topcoat. Sensitive to moisture.Base coats for one-day garage and shop systems.
Urethane cementHandles hot-water washdown, thermal shock and harsh chemicals.Matte, textured appearance; specialized installation.Commercial kitchens, food production and heavy washdown areas.

Finishes then sit on top of the chemistry: full or partial flake broadcast, quartz, solid color, metallic, clear over existing concrete, plus sheen from matte to high gloss and traction from smooth to heavily textured.

Bright auto shop with lifts reflected in a glossy white epoxy floor
Property improvement

The cheapest square footage to upgrade is the floor you already own.

The slab is already poured and already paid for. Grinding, repairing and coating it improves how a garage, a shop or a storefront looks and works without rebuilding anything.

Residential · Commercial · Industrial

Built around the property, not the product.

Three kinds of clients, three different sets of priorities. Scroll through how we approach each.

Modern black and white kitchen with a high-gloss white floor

Residential epoxy flooring

  • Garages
  • Great rooms
  • Casitas
  • Laundry & mudrooms
  • Patios

Homeowners usually come to us with one room in mind and leave with a plan for three. Interior slabs in Phoenix homes can be ground and coated once flooring is removed, giving a seamless surface that is easy to keep clean in a dusty climate. We pick sheen and traction room by room: satin and smooth in a living area, textured flake in the laundry room, UV-stable texture outside.

Good residential work also means respecting the house. That includes sealing off rooms against grinding dust, protecting cabinets and baseboards, and giving a clear schedule for when furniture and cars can come back.

Residential epoxy floors →
Boutique clothing store with a seamless light floor and lounge seating

Commercial epoxy flooring

  • Retail
  • Salons
  • Clinics
  • Showrooms
  • Offices
  • Gyms

For business owners and property managers, the floor is a line item that has to look right, clean easily and go in without long closures. We schedule commercial installs after hours, over weekends or in phases, and lean on fast-cure polyaspartic topcoats where downtime is tight.

Every commercial specification is written around the use: the cleaning chemicals your staff use, the traffic at the entry, whether carts or chairs roll across it, and how much sun comes through the storefront.

Commercial epoxy floors →
Long warehouse aisle between tall pallet racks on a smooth floor

Industrial flooring

  • Warehouses
  • Distribution
  • Manufacturing
  • Fleet bays
  • Docks

Industrial floors are about thickness, hardness and planning. Forklift lanes need high-build systems with abrasion-resistant topcoats, damaged joints need rebuilding so wheels stop chipping them, and aisles and pedestrian routes need clear striping.

Because most facilities can't stop operating, we break large floors into zones and coat them in sequence. That keeps product moving while each section is finished.

Warehouse floor coatings →
Garages, decorative finishes & workshops

Where most projects start.

Garage epoxy flooring

The garage is the single most common floor we coat in Phoenix, and it is also the toughest residential environment. Tires arrive hot, fluids drip, and dust rides in with every door cycle. Our standard garage build is ground and repaired concrete, a penetrating base coat, full flake broadcast and a UV-stable clear topcoat. It hides dust well, resists stains and gives the room a finished look. How we coat garages.

Decorative and metallic epoxy

For spaces where the floor is part of the design, decorative systems take over. Flake blends range from tight granite looks to warm desert mixes. Metallic epoxy is worked by hand into flowing, marble-like patterns that are different on every floor. Both can include borders, color breaks or a logo.

Basement and workshop flooring

Phoenix basements are uncommon but not rare, especially in custom homes, and below-grade slabs need moisture testing and often a vapor-tolerant primer. Workshops, hobby garages and home gyms are far more common. They get a thicker base and a slip-resistant topcoat so dropped tools, sawdust and sweat don't hurt the floor.

Two vehicles parked in a modern garage on a gray coated floor with a staircase behind
Installation process

Six steps. No shortcuts in the first three.

Most coating failures trace back to preparation. That is where we spend the most time on every job, whether it is a two-car garage or a 20,000-square-foot warehouse.

Installer on knees spreading coating with a squeegee across a gray floor
  1. Walkthrough and testing

    We measure, inspect the slab, test moisture, note existing coatings and cracks, and ask how the space is used. Samples are viewed in the room's real lighting. A written quote follows with the full system spelled out.

  2. Protection and setup

    Walls, cabinets, doors and adjoining rooms are protected. On commercial jobs we coordinate access, ventilation and any after-hours work with management.

  3. Grinding and repairs

    Planetary diamond grinders open the concrete and remove sealers, paint and weak surface paste. Edges are ground by hand. Cracks, spalls and joints are repaired and leveled.

  4. Primer and base coat

    A penetrating primer or pigmented base coat is applied to the clean, profiled slab. This is the layer that anchors the whole system.

  5. Decorative build

    Flake is broadcast, metallic pigment is worked, quartz is seeded or color coats are applied, depending on the finish chosen. Each layer goes on within the window that allows a chemical bond to the last.

  6. Topcoat, cure and handover

    A clear or tinted topcoat sets sheen, traction and wear resistance. You get written times for foot traffic, furniture and vehicles, plus care instructions for the system you chose.

Benefits of professional epoxy flooring

What changes once the floor is coated.

These benefits depend on a coating that is properly bonded and fully cured. That is the difference professional installation makes.

Cleaner every day

A sealed surface stops concrete dusting and wipes clean with a mop instead of a pressure washer.

Spills stay on top

Oil, coolant, hair dye and coffee no longer soak in and leave permanent marks.

Brighter spaces

Lighter, glossier floors reflect light around garages, shops and warehouses.

Tougher surface

A bonded resin layer takes the wear from tires, carts and foot traffic instead of the concrete.

Design options

Flake, metallic, solid colors, borders, logos and safety striping are all possible.

Traction you choose

Texture can be dialed up near entries, ramps and wet areas and kept smoother elsewhere.

Fast return to use

Polyaspartic topcoats can bring many floors back into service within a day or two.

Renewable, not disposable

When traffic lanes dull, a fresh topcoat can often restore the finish without redoing the floor.

9

Core floor coating services

6

Steps in every installation

4

Coating chemistries we specify

24

Phoenix neighborhoods & nearby cities served

Phoenix climate & flooring

Field notes from Valley job sites.

What a coating has to handle here is different from what the brochure assumes. These are the conditions that shape our product choices and our schedule.

Dark monsoon storm clouds over desert mountains
Monsoon storms can bring wind, dust and sudden humidity in a single afternoon.
Heat

Hot slabs, short working times

Resins react faster as temperature climbs. In summer, our crews start at first light, keep materials shaded and mix smaller batches so every section is spread and rolled before it starts to set.

Sun

UV decides the topcoat

Standard epoxy yellows in sunlight. Anywhere the sun reaches, such as patios, carports, open garages and storefronts, we finish with an aliphatic, UV-stable topcoat.

Monsoon

Dust and humidity

Blowing dust ruins a wet finish, and humidity spikes affect some fast-curing coatings. We watch the forecast, close doors during application and check dew point on monsoon-season jobs.

Tires

Hot tire pickup

Tires heated on summer roads can lift coatings that aren't fully bonded or cured. Thorough grinding, a penetrating base and patience before parking are the cure, not a special additive.

Project gallery

Finishes in real spaces.

Drag or use the arrows to browse examples of the systems and settings we work in.

Empty showroom with tall windows reflected in a glossy floor
Showroom glossHigh-gloss commercial topcoat
Blue and copper metallic epoxy pattern
Metallic detailLayered copper and blue pigments
Covered patio with gray outdoor sofa on a light coated slab
Covered patioUV-stable outdoor coating
Car detailing studio with a glossy floor and shelves of products
Detail studioChemical-resistant shop floor
Bright laundry room with washer, dryer and a light coated floor
Laundry roomSeamless and water-friendly
Fleet hall with a truck and yellow safety markings on the floor
Fleet hallStriping and traffic markings
Glass-walled hall with a mirror-like floor
Glass hallReflective solid-color system
Covered outdoor dining deck at sunset beside a desert landscape
Service areas

Working across Phoenix.

Our home base is the city of Phoenix, from downtown lofts and Midtown offices to North Valley garages and South Phoenix warehouses. We also serve neighboring cities when the project is a good fit.

  • Downtown Phoenix
  • Midtown
  • Uptown
  • Arcadia
  • Biltmore
  • North Central
  • Sunnyslope
  • Moon Valley
  • Deer Valley
  • Norterra
  • Desert Ridge
  • Ahwatukee
  • Laveen
  • Estrella
  • Maryvale
  • South Mountain
  • Sky Harbor area
  • Scottsdale
  • Tempe
  • Glendale
  • Peoria
  • Mesa
  • Chandler
  • Tolleson
More about our service area →
FAQ

Frequently asked questions

Straight answers about systems, scheduling, pricing and care. Each service page includes its own questions as well.

What does an epoxy floor coating service include?

On our jobs it covers the walkthrough and moisture test, protection of the space, diamond grinding, crack and joint repair, the primer or base coat, the decorative layer you choose, the topcoat, and written care and cure instructions. There is no separate prep contractor or upcharge for normal repairs.

How do you decide between epoxy, polyaspartic and polyurea?

By exposure and schedule. Indoors and out of the sun, epoxy is often the best base and decorative layer. Where sunlight reaches the floor or the space has to reopen fast, a polyaspartic topcoat or full polyaspartic system makes more sense. Polyurea base coats suit fast garage and shop systems on slabs with large temperature swings.

Can you coat a business without closing it?

Often, yes. We can work nights and weekends, coat in phases, and use fast-curing topcoats to reduce downtime. We plan the sequence with you before scheduling.

How long does a typical project take?

Many garages are one to two days on site. Interior metallic floors usually take several days because of longer cure times between layers. Commercial and warehouse projects are scheduled by zone. Your quote includes the expected timeline.

Do coated floors add value to a property?

We can't promise a specific resale figure, and anyone who does is guessing. What a coated floor reliably does is make a garage, shop or commercial space cleaner, brighter and easier to maintain, which buyers, tenants and customers tend to notice.

Will my floor be slippery?

That depends on the finish and the topcoat. Flake floors have natural texture; smooth gloss floors can be slick when wet. We add anti-slip aggregate where it is needed, such as near entries, ramps, wash areas and patios.

Can you remove my old coating or tile first?

Yes. Failed coatings, paint and thinset residue are ground off as part of preparation. Full tile demolition can be included or handled by your own crew beforehand; we discuss this during the walkthrough.

How should a coated floor be cleaned?

Remove grit often with a dust mop, broom or blower, then wash as needed with warm water and a neutral-pH cleaner. Commercial floors can be auto-scrubbed with the right pads. Avoid acidic cleaners and harsh degreasers on topcoats.

Do you install floor striping and safety markings?

Yes. Aisle lines, walkways, parking stalls, hazard zones and color-coded areas can be built into warehouse and commercial systems or added to an existing coated floor.

Do you provide quotes for property managers and contractors?

We do. We can quote from plans or a site visit, provide product data sheets for submittals, and coordinate with general contractors on slab readiness and scheduling.

Free walkthrough

Let's put the right system on your floor.

Tell us what you're working with: a garage, a living space, a storefront or a warehouse. We'll come out, look at the concrete, and give you a written quote that shows every layer and every step.

Call (602) 000-0000 →

No obligation. We use your details only to respond to this request.